Operating instructions RA 41 Plus (H)
7 Operation
orbitalum tools
gmbh
(07.08)
MT_RA 41 Plus (H)_BA_04_790046773_04.doc
29
7.7.3
Bevel correction (only at saw position 1)
If a bevel is too small, it can be corrected by advancing the cutter:
1. Release the clamping lever (1).
2. Move the stop (2) to the right.
3. Switch the motor on.
4. Using the grip, turn the motor carefully in a clockwise direction until the
bevel cutter engages.
5. Continue to turn smoothly until the pipe has been beveled and the markings
on the rotary element and housing are in line.
6. Switch the motor off.
The cutter moves further into the pipe wall and the bevel becomes larger.
Summary of Contents for RA 41 Plus
Page 39: ......
