1 Notes on safety
Operating instructions RA 41 Plus (H)
4
(07.08)
MT_RA 41 Plus (H)_BA_04_790046773_04.doc
orbitalum tools
gmbh
1.3
Working with safety in mind
"Make your contribution to safety in the workplace."
•
Report any unusual behavior on the part of the machine to the person in
charge immediately.
•
Always work with safety in mind.
•
Wear safety goggles, safety-gloves and hearing protection during working
with the RA 41 Plus (H).
•
Tie up long hair (snood-type cap); do not wear any wide clothes.
Attention:
jewels and ties can be grasped by the rotating parts.
•
Switch the RA 41 Plus off after completing each stage of work and allow
the machine to run a stop.
•
Disconnect from the mains before cleaning-, maintenance- and repair-work
the RA 41 Plus (H) and let the machine leak.
•
Keep the RA 41 Plus (H) dry, do not use in the rain.
•
Do not use the RA 41 Plus (H) in areas subject to explosion hazards.
Danger of death by electric shock!
If the mains cable is damaged, live parts may cause death when being touched
directly.
:
Keep the mains cable of the pipe cutter motor away from the saw blade or
bevel cutter.
X
Secure the falling pipe piece.
:
Do
not
let the cut-off pipe piece drop in an uncontrolled way.
:
Do
not
run the machine unattended.
X
While processing the pipe, always keep an eye on the position of the mains
cable.
Danger of being injured by sharp cutting edges!
:
Keep hands away from the tools during cutting or beveling.
:
Never
equip both sawing positions with saw blade and bevel cutter at the
same time.
X
Wear safety gloves.
DANGER
WARNING
Summary of Contents for RA 41 Plus
Page 39: ......
