Information and safety instructions
ORBIMAT 180 SW
| Operating instructions
10
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
(17.09.18) OW_ORBIMAT_180SW_BA_850060202_00_EN
X
Do not touch energized parts (workpieces), especially when igniting the arc.
X
From the start of the welding process avoid contact with the tube and the housing of the orbital weld head.
X
Wear dry safety shoes, dry metal-free (grommet-free) leather gloves and dry safety suits to minimize the electrical
hazard.
X
Work on a dry surface.
DANGER!
Risk of death for people with heart problems or cardiac pacemakers.
X
Do
not
allow persons with increased sensitivity to electrical hazards (e.g. weakness of the heart) to work with the
machine.
DANGER!
Danger of an electric shock in the case of improper reaching in into and opening of the machine.
X
Allow only a professional electrician to access the electrical system.
DANGER!
The danger of an electric shock exists through non-compatible or damaged connectors.
X
Do not use adapter plugs together with protectively grounded power tools.
X
Ensure that the connecting plugs of the machine fit into the outlet.
X
When connecting use a residual-current circuit breaker 30 mA.
2.7.6
Danger through incorrect handling of pressure tanks
WARNING!
Various injuries and damage to property.
X
Heed safety regulations for pressure tanks.
X
Heed safety data sheets for pressure tanks.
2.7.7
Damage to eyes through radiation
WARNING!
During the welding process infrared, glaring and ultraviolet rays arise that can seriously damage
the eyes.
X
Keep the flip cover and swivel clamp closed during the welding process.
X
During operation, wear eye protection to EN 170 and skin-covering safety clothing.
X
At closed weld heads ensure proper working order of the eye protection.
2.7.8
Dangers through electromagnetic fields
DANGER!
Depending on the form of the workplace life-threatening electromagnetic fields can arise in the direct
vicinity.
X
People with heart problems or cardiac pacemakers may
not
operate the welding system.
X
The operator has to ensure safe design of the workplace in accordance with the EMF Directive 2013/35/EU.
X
Use only electrical devices with protective insulation in the working area of the welding system.
X
Observe electromagnetically-sensitive devices when igniting the system.
