ORBIMAT 180 SW
| Operating instructions
Operation
(17.09.18) OW_ORBIMAT_180SW_BA_850060202_00_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
57
Renaming data
1. In the main menu select the "
Program Manager
".
2. Press softkey 4 "
Rename
" .
The selected file is indicated by a field highlighted in yellow.
3. The complete test is marked and can be renamed freely by using the keyboard or by double-clicking on the touch
screen.
Deleting data on the external memory card
X
Same procedure as for "Deleting data"
8.10.2
Entering comments and application data ("Process details")
Useful information on individual parameters (material, gas type, electrode, etc.) and comments (for example a description
of the seam preparation, an angle setting of the electrode with adapter) about a procedure can be entered for the operator.
This information may be required for ensuring consistent results when the procedure is executed. These notes and com-
ments are procedure-based.
Entering notes and comments
Several possibilities are available for entering notes and comments:
Either:
1. Select "
System settings
", then "
Program settings
" and subsequently "
Process details
" in the main menu.
2. Various parameters can now be added individually.
or:
1. In the respective welding procedure select the "
Basic adjustments
".
2. Select "
Process details
".
3. Various parameters can now be added individually.
A comment field appears in the display.
Fig. 28:
Process details
Fig. 29:
Comments
4. Highlight the input field, enter the text and save.
