ORBIMAT 180 SW
| Operating instructions
Commissioning
(17.09.18) OW_ORBIMAT_180SW_BA_850060202_00_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
25
7.4.3
Connecting weld heads
For procedure see operating instructions of weld head.
7.4.4
Detaching coolant hoses
X
Lightly push back the front ring on the machine-side connection and pull off the coolant hose.
7.4.5
Pumping out coolant
The connections of the machine close automatically when the coolant hose is removed.
X
When connecting the coolant hoses, pay attention to the flow and return lines.
1. Connect the drain hose to the coolant connection, blue.
2. Close off the coolant hoses with the included plugs to prevent the coolant from running out of the weld head.
7.4.6
Closing off gas hose
X
Actuate the side pawl on the hose-side plug connection and pull gas hose out of connection.
7.5
Commissioning
DANGER!
Faulty ignition in case of unmounted or incorrectly positioned weld head.
Electric shock, bodily injury and damage to property also at other devices.
X
If the weld head is not ready for operation, switch the machine to the "Test" function.
DANGER!
Improper access to and opening of the ORBIMAT system.
Electric shock.
X
Disconnect the system from the mains.
X
Remove all the external devices connected to the system (weld heads, etc.).
X
If the machine was in operation beforehand, allow it to cool down sufficiently.
X
Allow only a professional electrician to access the electrical system.
[
Never
connect an opened system to the mains network.
DANGER!
Liquid in the housing due to improper use and transport.
Electric shock.
[
Do not
place liquids (beverages) on the system.
X
Do not block ventilation slots.
X
Check housing interior for moisture after transporting the machine and leave it open to air it out
if necessary.
WARNING!
Ultraviolet radiation from the arc while welding.
Damage to eyes and burning of skin.
X
During operation, wear eye protection to EN 170 and skin-covering safety clothing.
X
At closed weld heads ensure proper working order of the eye protection.
WARNING!
Hot leaking liquids and hot plug connections during heavy operation.
Danger of scalding.
X
Heed the safety precautions of the technical supervisor/person in charge of safety.
CAUTION!
Hot surfaces of the weld head and weld points, including for a period of time after welding.
Danger of burns.
X
Wear safety gloves.
Before welding is carried out the cooling circuit is filled with coolant.