Overview of system Monitor (overview)
About O3b Link
5-10
OceanTRx™4-500 O3b System Installation Guide
Ignore Modem Lock
The system will not replace the antenna when the Modem loses
lock.
Rx Lock Filter Time
If ignore modem lock is not checked this filters the system
response to lock or not lock events from the modem.
Mute Time
Time to start transmitting before handover time
Handover window (s) The time interval in which two antennas are transmitting to two
different satellites.
Delay Between Tx(s)
When mid pass handover accrue, the antenna will start
transmitting only after this time interval.
ACU-X Role
Refer to section
5.2.4.1.
Control Buttons
Load Settings - Load the current settings from the CCU,
must be applied at least once before updating the settings.
Apply - Update the settings to the CCU
5.2.4.4
Viewing Antenna Names and IP Settings
The antenna names and system (ACUs and CCU(s)) IP Addresses can be viewed from the
Control
tab, under the lower window areas as shown below.
Figure
5-9: Partial Control Tab
–
System IP and Antenna Names
Option
Description
Select Number of Antennas
By default, three antennas are defined: two are
operational and one is on standby. Use this parameter to
redefine the configuration if one of the antennas is
faulty.
Backup Antenna Track Mode
Define the operation mode of the backup antenna
currently defined as standby. If checked, backup
antenna will track the satellite (along with the other
antenna(s))
ACU and CCU
IP Addresses
Antenna
Names
