About O3b Link
Overview of system Monitor (overview)
OceanTRx™4-500 O3b System Installation Guide
5-3
5.2.1
Status of Each Antenna
The antenna-specific window areas provide general information on each antenna and
access to the antenna’s MTSVLink application. The figure below shows
one
of the areas.
Figure
5-3: Single Antenna General Parameters
Item
Description
Blockage color
System assigned color for the blockage area represented in
the System Graphical Display
Mode
Mode of operation:
Standby – Antenna is not active.
Program Route – calculated route followed by antenna
Program Track – satellite signal used for tracking
Antenna Tracking
point
Position of antenna.
Azimuth and Elevation angles of this antenna.
Tx status
Tx status (BUC mode) of this antenna:
ON – antenna is currently transmitting.
OFF – antenna is not transmitting.
Track Status
Shows if antenna is tracking or not and if the modem is
locked or unlocked.
AGC
Minimum, maximum and threshold AGC values.
Default range: -80 to -60
NOTE: The available displayed range can be modified
according to section
7.4.
ACU GUI
Click to access antenna dedicated MTSVLink.
The MTSVLink is used to perform all antenna configuration,
management and troubleshooting operations. The application
is fully described in the OceanTRx™ User Manuals.
Show/Hide
Blockage Zone
Shows or hides antenna specific blockage zone in the
graphical display.
Blockage Color
Antenna
Tracking Point
Tx status
Track status
AGC Level
Operation Mode
Open
MTSVLink
Show/Hide this
antenna’s blockage
zone
