About O3b Link
Overview of system Monitor (overview)
OceanTRx™4-500 O3b System Installation Guide
5-9
5.2.4.3
Modifying Operation Parameters
System operation parameters can be modified from the
Control
tab, by doing one of the
following:
Modifying the parameters
Loading settings from a pre-defined file
Be sure to click Apply after changing parameters
Figure
5-8: Partial Control Tab - Modifying System Operation Mode
Option
Description
Select Number of
Antennas
By default, two or three antennas are defined (according to
installation): two are operational and one is on standby. Use this
parameter to redefine the configuration if one of the antennas is
faulty.
Backup Antenna
Track Mode
Define the operation mode of the backup antenna currently
defined as standby. If checked, backup antenna will track the
satellite (along with the other antenna(s))
Beacon mode
Check the Beacon Mode Of Tracking checkbox. The antennas
track the data Beacon of the satellite (rather than the satellite
itself).
