manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 34

66

66

Install the Base

Carrying and Using the Infant Car Seat

66

66

10

Install the Base

67

67

Carrying and Using the Infant Car Seat

67

67

The Sunshade can be moved by hand 
into either of two positions.

1. Move the Sunshade into the 
 

upright position to shield your child 

 

from the sun (Photo D).

2.  Lower the  Sunshade 

fl

 ush with the 

Upholstery when not in use. 

The Sunshade has a Sunshade

Extension:

1. With the Sunshade into its 
 

upright position, pull the Sunshade 
Extension from its pocket at the 
front of the Sunshade (Photo E).

2. Wrap the Sunshade Extension’s 

elastic around the lower edge

 

of the Infant Car Seat (Photo F). 

Using the Sunshade 

cont’d

!

WARNING

!

Death or Serious Injury 

can occur

For safety, lower the Sunshade when 
the Infant Car Seat is docked in your 
vehicle.

Using the Sunshade

CRUSHING HAZARD:  Never put 

objects on top of the Sunshade.   

The weight of objects may cause 
the Sunshade to collapse.

  

FALL HAZARD:  Never carry the 

Infant Car Seat by grasping the 

Sunshade.

VEHICLE COLLISION HAZARD:  

Always lower the Sunshade fully 

when the Infant Car Seat is in 

your vehicle, otherwise driver 

visibility may be impaired.

D

E

F

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands