manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 14

Installing the Base

26

26

Install the Base

27

27

At the safest seating location, 

follow the appropriate 

instructions for installing the 

Base according to what vehicle 

restraint method is available.  

If 

the LATCH Belt or vehicle seat 
belt does not stay tightly adjusted 
around the Base at all times, refer 
to your vehicle owner’s manual. 

Choosing Where to Install the Base 

cont’d

Some vehicles do not have any seating locations where a child 

restraint system can be installed safely.

  If you are unsure where 

to place the Base, refer to your vehicle owner’s manual for speci

fi

 c 

instructions about seating locations that are safe for child restraints.

NEVER secure the Base in a seating location with a front 

airbag.

  Check your vehicle owner’s manual regarding side air bag 

compatibility with child restraint systems (Figure A).

NEVER secure the Base in a front seating location

 unless 

recommended by the vehicle owner’s manual.

The Base must be installed in forward facing vehicle seats. 

 

Side facing or rear facing vehicle seats CANNOT be used (Figure B 
& C).

Do not secure the Base and Infant Car Seat in seating 

locations where the seat back does not lock in an upright 

position.  

!

WARNING

!

Improper placement of Base and Infant Car Seat 

increases the risk of serious injury and death

Choosing Where to Install the Base

A

B

C

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands