manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 18

34

34

Install the Base

Install the Base

35

35

front of the Base clockwise. (Photo I)

12.

CHECK

 the installation is secure 

 

by tugging and pulling the Base in

    various directions (Photo J) – the 

Base Upright, where the belt is 
secured, should not move by more 
than 1 inch in any direction.  If the 
Base is loose, remove and re-install 
it beginning at Step #2.

13.

CHECK

 that the Base is level by 

looking at the Level Indicator (Photo 
K).  If the ball is not in the green 
zone (Photo L), remove the Base, re-
install it by repeating Steps 2 - 13.  If 
the Base cannot be secured tightly 
with the ball in the green zone, try 
any of the following:

-  Remove the Base. Position a 

rolled towel under the Base, 
making sure the front of the 
Base contacts the vehicle seat 

Installing the Base: With LATCH

 cont’d

Installing the Base: With LATCH

 cont’d

 

When using the LATCH system, 
the Orbit Base uses only the lower 
anchors.

9.  Pull on each LATCH Connector to 

be sure it is locked onto the anchor 
(Photo G).

10.Pull each LATCH Belt loop tight to 

remove the slack and make sure the 
Base is not loose (Photo H).

11.Turn the StrongArm Knob at the 

As you’re turning the Knob, the StrongArm 
mechanism is amplifying your strength and 
tightening the Base into the car.

Each installation varies slightly, but usually 
you turn the Knob almost 10 full revolutions.

You know that you have reached the optimal 
tightness setting when the Base Upright 
cannot move more than 1” in any direction.

J

K

L

G

H

I

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands