manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 28

54

54

Install the Base

Securing Y

our Child

54

54

Install the Base

55

55

Securing Y

our Child

55

55

is threaded into slots at the same 
height and that neither shoulder 
strap is twisted (Photo G).

e.  Turn to the back of the Infant 

Car Seat again and secure each 
shoulder strap loop entirely onto 
a single Splitter Plate as shown 
(Photo H).

3. 

CHECK

 that the straps are secure by 

pulling on the shoulder straps from 
the front (Photo I).

4. 

CHECK

 that Upholstery and 

fasteners around the shoulder strap 
slots do not interfere with the free 
movement of the Restraint Harness.

5.  Re-zip the back of the Infant Car 

Seat closed.  This completes the 
shoulder strap height adjustment.

Sizing the Restraint Harness to Your 

Child 

cont’d

2. Move the shoulder straps, if needed, 

to the correct slots:

a.  Find the Adjuster Strap Lock 

under the Upholstery 

fl

 ap at the 

front of the seat.  Pull on the 
shoulder straps while pressing 
down on the Adjuster Strap Lock 
to loosen the straps (Photo D).

b. Un-zip the back of the Infant Car 

Seat and pull the panel up to 
reach the Splitter Plates (Photo E).

c.  Remove each shoulder strap from 

its metal Splitter Plate.

d. From the front of the Infant Car 

Seat, rethread each shoulder 
strap through the upholstery and 
plastic slots (Photo F).

CHECK

 that each shoulder strap 

Sizing the Restraint Harness to Your 

Child 

cont’d

H

I

G

D

E

F

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands