manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 30

58

58

Install the Base

Securing Y

our Child

58

58

Install the Base

59

59

Securing Y

our Child

59

59

7. Insert both Buckle Tongues into the 

Buckle (Photo N and O). You should 
hear and feel a 

CLICK 

as each 

Buckle Tongue is inserted into the 
Buckle.

8. Pull up on the Buckle Tongues to 

CHECK

 they are locked (Photo P).  

DO NOT use the Infant Car Seat if 
the Restraint Harness does not latch 
in place, and contact Orbit Baby.

9.  Gently pull up on the shoulder 

straps to tighten the lap section of 
the Restraint Harness (Photo Q).

CLICK

 the buckle.

CLICK

 the chest clip.

CHECK

 by tugging on harness.

Buckling the Restraint Harness

 cont’d

1. Open the Restraint Harness by 

squeezing both sides of the Chest 
Clip as shown (Photo L).

2. Unbuckle the Restraint Harness 

by pushing the red button on the 
Buckle.

3. Place your child into the Infant Car 

Seat, making sure both back and 
rump are fully supported by the 
seating surfaces.

4. Position the Restraint Harness 

around the child.

5. Make sure the Buckle Pad is 

between the child and the Buckle.

6. 

CHECK

 that there are no twists in 

the Restraint Harness straps (Photo 
M ).

Buckling the Restraint 

Harness

P

Q

N

L

M

O

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands