manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 22

42

42

Install the Base

Install the Base

43

43

To un-install the Base and remove it 

from your vehicle:

1.  Turn the StrongArm Knob 

counterclockwise and reset the 
Base StrongArm to zero (Photo CC).

2.  If the Base is secured with LATCH, 

push the red button on each LATCH 
Connector and pull it from the 
LATCH Anchor (Photo DD).  Open 
the Lock-Off Clamp to release the 
LATCH Belt and store the LATCH 
Connectors as shown (Photo EE).

If the Base is secured with a vehicle 
seat belt, open the Lock-Off Clamp, 
unbuckle the vehicle seat belt and 
guide it through the Belt Guides.

3.  Using both hands to support the 

weight of the Base, remove it 
carefully from the vehicle.

Removing the Base

(Photo BB), and repeat Steps 
2 to 10.  The towel should be 
compressed as the StrongArm 
tightens the Base into place.

-    Try installing the Base in a 

different seating position.

-    Contact your vehicle dealer for 

assistance and possible vehicle 
seat belt modi

fi

 cation parts.

-  Seek assistance from one of 

the resources in the “Need Help 
Securing Your Infant Car Seat 
and Base?” section (page 44).  

The Base must be properly level for 
the Infant Car Seat to be safe.  An 
Infant Car Seat that is too reclined 
can result in ejection during a crash, 
and one that is too upright can 
cause breathing dif

fi

 culties.  

Do not use this Infant Car Seat and 
Base until they are safely installed.

Installing the Base: With Vehicle Seat 

Belts 

cont’d

CC

DD

EE

BB

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands