manualshive.com logo in svg

Orbit baby Infant Car Seat + Base, Manual

Share
Download
Orbit baby Infant Car Seat + Base Manual Download Page 21

40

40

Install the Base

Install the Base

41

41

10.

CHECK 

that the Base is level by 

looking at the Level Indicator (Photo 
Z).  If the ball is not in the green 
zone (Photo AA), remove the Base 
and re-install it by repeating Steps 2 
- 10.  If the Base cannot be secured 
tightly with the ball in the green 
zone, try any of the following:

-  Remove the Base. Position a 

rolled towel under the Base, 
making sure the front of the 
Base contacts the vehicle seat 

Installing the Base: With Vehicle 

Seat Belts

 cont’d

As you’re turning the Knob, the StrongArm 
mechanism is amplifying your strength and 
tightening the Base into the car.

Each installation varies slightly, but usually 
you turn the Knob almost 10 full revolutions.

You know that you have reached the optimal 
tightness setting when the Base Upright 
cannot move more than 1” in any direction.

Installing the Base: With Vehicle 

Seat Belts

 cont’d

Belt Path and across the open 

 Lock-Off 

Clamp.

-  Pull on the lap-only vehicle seat 

belt to tighten it along the Belt 
Path (Photo V).

-    Secure the Lock-Off Clamp 

fi

 rmly upon both portions of 

the lap-only vehicle seat belt 
(Photo W). 

Continue on to Step # 8.

8.  Turn the StrongArm Knob at the 

front of the Base clockwise.

 (Photo 

X)

9.  

CHECK 

the installation is secure by 

pulling the Base in various directions 
(Photo Y) – the Base Upright, where 
the belt is secured, should not move 
by more than 1 inch in any direction.  
If the Base is loose, remove and 

 

re-install it beginning at Step #2.

Y

Z

AA

V

W

X

Summary of Contents for Infant Car Seat + Base
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands