81
REPLACEMENT OF THE BATTERY
ATTENTION: This product incorporates a battery. Do not
dispose of the product without taking the precaution of
disassembling the battery and depositing it in a suitable
container for recycling.
The equipment carries a CR2032 battery of 3 V.
To replace the battery or for its extraction at the end of the product
life, remove the screws that fix the protection and the power
selection control to access the circuit where it is housed.
Any handling involving the opening of the equipment should be carried
out by authorized and qualified installers.
EXTRAS
VIARIS COMBI + chargers can incorporate, depending on the model:
Electrical protections magnetot differential
Magnetothermic protection suitable to the current of the smart charger +
differential current protection. Carried out the electrical installation check the
differential operation by pressing its test button.
Complete electrical protections according to ITC-BT-52
Against temporary and transient surges +
magnetothermic
switch
(magnetothermal protection suitable for intelligent charger current) + differential
current protection. Carried out the electrical installation check the differential
operation by pressing its test button.
Single Phase / 3 Phase energy meter
Certified according to the MID Directive (2004/22/EC) According to EN 50470-3
Ethernet communication
For installations requiring Ethernet communication.
The configuration is done by accessing the web platform of the charger.
You must choose between DHCP (dynamic IP assignment) or IPStatic, where
you will have to fill in the ethernet network data (IP, MAC, Gateway, Subnet
Mask, DNS Server) provided by the person responsible for it.
Communication 4G
Wireless communication can be installed using a Wi-Fi USB Dongle.
It is a requirement that you configure in the USB dongle an access point with
SSID: ORB_VIARIS_4G and PASSWORD: ORB1234$, in addition to setting
up the APN depending on the operator providing you with the SIM card.
