80
MAINTENANCE
It is envisaged the maintenance of the VIARIS chargers should be very low,
limited to:
Cleaning Tasks.
Operation voltage and input voltage checks.
Recommended annual service.
For cleaning and checking equipment connections charger MUST be
disconnected from power supply.
For the external cleaning of the equipment, it is recommended to use
a soft, dry cloth, e.g. a microfiber cloth. Do not use abrasive materials
or detergents.
TECHNICAL CHARACTERISTICS
Feeding
|
Nominal frequency
| Depending on characteristics label.
Power
|
Self-consumption
Single-phase
Tree-phase
vacuum
4 W
4 W
load function
7 W
14 W
Charging modes (depending on model) Modes 1 and 2 according to EN 61851-1
(Schuko)
Mode 3 according to EN 61851-1
Connector cable
Type 2. Load mode 3: according to EN
62196-2
Communication Wi-Fi
802.11 b/g/n
Closing of the envelope
with screws
Protection class
Case II. Insulating envelope
Degree of protection
IP54 according to EN 60529
Degree of mechanical protection
IK10 according to EN 62262
DRC-DD
6 mA protection.
Activation/Stop modes
Touch or RFID configurable by App
Type of terminals
Terminals with screw
Peeling length
12 mm
Operating temperature
-30 °C to + 50 °C
