2-4
INSTALLATION
ORBAN MODEL 1101
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
If you do not accept the terms above, please do not run the installer. If you are in
the process of running it, it will display the text above on-screen, and will allow
you to click the CANCEL button to abort the driver installation.
If you are upgrading from a previous version, make sure you install the new
software in the same folder location as your previous software; this will most
likely be the default folder location, which is Program Files/Orban/Optimod-PC
1101.
A)
Apply power to your computer and let it boot.
After most of the normal boot process is finished, the Windows “New
Hardware Detected” wizard will appear.
B)
Click
Cancel
as many times as necessary to close the “New Hardware De-
tected” wizard.
When you run the Orban installer according to the instructions below, it
will automatically install the correct driver.
C)
(Optional) If you have installed more than one card, Windows will continue to
present “New Hardware Detected” windows until you have installed all cards.
Continue to cancel out of the “New Hardware Detected” wizard until it no
longer appears.
D)
Insert your OPTIMOD-PC CD-R in your computer’s CD/DVD reader, or if you
have downloaded the OPTIMOD-PC software from, locate the
file.
E)
Navigate to Start/Run on your computer. In the Run dialog box, type
x:setup
,
where “x” is the drive letter of your CD-ROM drive, and click “OK.”
This will install the 1101 driver and its control and server software on
your computer. The server runs as a Windows service and will automati-
cally run at boot time.
IMPORTANT
: Your computer must be rebooted to load the new driver
before you can use your newly installed cards. The installer will offer to
reboot your computer automatically at the end of the installation. If you
are updating the driver and/or software and/or firmware, a power-down
reboot is necessary. If you are performing this administration remotely,
plan accordingly.
F)
Answer the questions when prompted by the Orban installer.
The installer will allow you to create a desktop icon pointing to the
OPTIMOD-PC control application and will allow you to create an “agent”
in the System Tray that launches the OPTIMOD-PC control application via
a single click.
If you are upgrading from an earlier software version:
If the ver-
sions of the driver, service, and application are incompatible, each
OPTIMOD-PC card will function in its default “sound card mode.” The
Summary of Contents for Optimod-PC 1101
