Orban OPTIMOD 6300, Operating Manual

Page: 82 / 255

2-34
INSTALLATION ORBAN MODEL 6300
To Unlock the Front Panel:
A) On the 6300 front panel, operate any button or the knob.
The P
ASSCODE
screen will appear.
B) Enter a passcode using the four soft buttons.
The 6300 functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in
S
ETUP
> S
ECURITY
> A
UTOLOCK
. (You can set a
new delay at any time if you have an
A
LL
A
CCESS
passcode.)
Dial-up Networking and the Passcode
When you make a Windows Dial-up Networking connection, Windows will ask you
for your passcode. To allow the connection to occur, enter any passcode that you set
at the 6300’s front panel. Once your PC is connected to the 6300, you will be able to
access the 6300 functionality corresponding to the security level of your passcode.
If You Have Forgotten Your Passcode
You can reset factory defaults and wipe out security passcodes (in case you forgot
your
A
LL
A
CCESS
passcode).
A) Remove power from the 6300.
B) While pressing both the
E
SCAPE
and
S
ETUP
buttons, restore power.
The Restore Defaults screen appears.
C) To gain access to the 6300, press the
E
RASE
A
LL
P
ASSCODES
soft button.
D) Reprogram passcodes as necessary; see To Create a Passcode on page 2-32.
The
R
ESTORE
D
EFAULTS
button (in the Restore Defaults screen) restores all
System Setup and Input/output parameters to their factory default set-
tings. It also erases all passcodes. You should never need to use this but-
ton in an existing installation, although it is a convenient way to make
the 6300 “factory fresh” if it is being installed in a different facility.
The R
ESTORE
D
EFAULTS
button takes you to a screen that allows you to
keep or erase any user presets that exist in your unit.