Orban OPTIMOD 6300, Operating Manual

Page: 106 / 255

2-58
INSTALLATION ORBAN MODEL 6300
Use either an internal modem or external modem with your computer.
a) If you are using an external modem, connect the modem to a serial port on
your PC and make sure the modem is connected to a working phone line.
b) On your PC, click “Start / Settings / Control Panel / Phone and Modem
Options.”
c) Click the “Modems” tab.
d) Verify that your modem appears in the list available under “The following
Modems are installed.”
e) Verify that your modem is “Attached to” the correct port.
If your modem is unavailable or not attached to the correct port, you
must Add it. See your Windows documentation.
f) If your modem is available in the list available under “The following
Modems are installed” and it is attached to the correct port, then click
“Properties” for that modem.
g) Make sure the port speed is set at 115200.
h) Click “OK.”
B) Create a New Windows 2000 Dial-Up Connection:
a) Click “Start / Settings / Network and Dial-up Connections / Make New
Connection.”
b) Once the New Connection Wizard has opened, Click “Next.”
C) Create a New Windows 2000 Direct
Connection:
a) Launch 6300 PC Remote.
b) Choose “Connect / New 6300”
c) Give your 6300 a name (e.g.,
“KABC”) by entering this name
in the “6300 Alias” field.
d) If you wish to have 6300 PC
Remote remember the
password for this Optimod,
enter the password in the
“Password“ field.
e) Select “Serial Connection.”
f) Click the “Add” button.