Orban OPTIMOD 6200, Operating Manual

Page: 71 / 195

OPTIMOD INSTALLATION
2-29
The analog output pair is intended primarily for monitoring because the
AES/EBU digital output will give much better peak modulation control. The
analog output can be fed either before or after the look-ahead limiter. Since
the look-ahead limiter contributes most of the time delay through the system,
listening from the output of the multi-band compressor (ahead of the look-
ahead limiter) can be much more comfortable to a DJ or presenter
monitoring his/her voice through earphones.
6. End I/O CALIB programming.
[Skip this step if you will be using the AES/EBU digital input and output.
Continue to step 1 on page 2-30.]
When you are finished adjusting input/output parameters, repeatedly press the
Escape button to return to the Idle G/R screen.
7. Select the program format of your station.
This step selects the processing to complement the program format of your
station.
After this step, you can always select a different processing preset, modify
presets to customize your sound, and store these presets as User Presets.
A)
Press the Recall button.
B)
Use the knob to scroll through the list of Factory Programming Presets.
C)
When you have found an appropriate preset, press the
RECALL NEXT
soft key.
Your chosen preset is now on the air.