Orban OPTIMOD 6200, Operating Manual

Page: 141 / 195

OPTIMOD TROUBLESHOOTING
5-7
Shipping Instructions
Use the original packing material if it is available. If it is not, use a sturdy, double-walled
carton. For Model 6200 OPTIMOD DAB, it should be no smaller than 4
″
(H) x 15.5
″
(D) x 22
″
(W)

10 cm (H) x 40 cm (D) x 56 cm (W), with a minimum bursting test
rating of 200 pounds (91 kg). For Model 6200S, it should be no smaller than 1.75
″
(H) x
15.5
″
(D) x 22
″
(W)

4.5 cm (H) x 40 cm (D) x 56 cm (W), with a minimum bursting
test rating of 200 pounds (91 kg). Place the chassis in a plastic bag (or wrap it in plastic)
to protect the finish, then pack it in the carton with at least 1.5 inches (4 cm) of cushion-
ing on all sides of the unit. “Bubble” packing sheets, thick fiber blankets, and the like are
acceptable cushioning materials; foam “popcorn” and crumpled newspaper are not. Wrap
cushioning materials tightly around the unit and tape them in place to prevent the unit
from shifting out of its packing.
Close the carton without sealing it and shake it vigorously. If you can hear or feel the
unit move, use more packing. Seal the carton with 3-inch (8 cm) reinforced fiberglass or
polyester sealing tape, top and bottom in an “H” pattern. Narrower or parcel-post type
tapes will not withstand the stresses applied to commercial shipments.
Mark the package with the name of the shipper, and with these words in red:
DELICATE INSTRUMENT, FRAGILE!
Insure the package properly. Ship prepaid, not collect. Do not ship parcel post.