Oracle netra X5-2 Service Manual Download Page 68

Page: 68 / 274

Power Off the Server (Oracle ILOM)

Power off the server.

See:

■

“Power Off the Server (Oracle ILOM)” on page 68

■

“Power Off the Server (Power Button - Graceful)” on page 69

■

“Power Off the Server (Emergency Shutdown)” on page 69

Related Information

■

“Power Off the Server (Oracle ILOM)” on page 68

■

“Power Off the Server (Power Button - Graceful)” on page 69

■

“Power Off the Server (Emergency Shutdown)” on page 69

Power Off the Server (Oracle ILOM)

You can use the SP to perform a graceful shutdown of the server. This type of shutdown ensures

that all of your data is saved and that the server is ready for restart.

Note -

Additional information about powering off the server is provided in

Server

Administration

Access Oracle ILOM.

See

“Access the SP (Oracle ILOM)” on page 28

Depending on the type of problem, you might want to view server status or log files. You also

might want to run diagnostics before you shut down the server. See

“Detecting and Managing

Faults” on page 21

Power off the server.

stop /System

Are you sure you want to stop /System (y/n)?

Stopping /System
->

Note -

You can also use the Power button on the front of the server to initiate a graceful server

shutdown. (See

“Power Off the Server (Power Button - Graceful)” on page 69

.) This button

is recessed to prevent accidental server power off.

Related Information

■

“Prepare to Power Off the Server” on page 67

Netra Server X5-2 Service Manual • October 2016

Summary of Contents for netra X5-2



















































































































































































































































































Search results

Summary of Contents for netra X5-2

Reviews:

Related manuals for netra X5-2

Brands by name

Popular brands

Oracle netra X5-2, Service Manual

Search results

Summary of Contents for netra X5-2

Reviews:

Related manuals for netra X5-2

Brands by name

Popular brands