Oracle netra X5-2, Service Manual

Page: 229 / 274

Determine if the Motherboard Is Faulty
/System/Networking/Ethernet_NICs/Ethernet_NIC_0
Targets:
Properties:
health = OK
health_details = -
...
->
where x is the number of the interface, from
0
to
3
.
If the
health_details
property identifies the interface as faulty, consider replacing the
motherboard. See “Remove the Motherboard” on page 230 .
6. Verify that the motherboard is faulty.
If the motherboard is faulty, you will see
/SYS/MB
,
/SYS/MB/P0
, or
/SYS/MB/P1
under the
Value
heading.
For example:
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB
...
->
■
If the motherboard is faulty, replace it. See “Remove the Motherboard” on page 230 .
■
If a FRU value different from
/SYS/MB
,
/SYS/MB/P0
, or
/SYS/MB/P1
is displayed, see
“Component Service Task Reference” on page 65 to identify which component is faulty.
7. Use the Oracle ILOM
faultmgmt
shell to identify the faulty component.
See “Display Faults (
faultmgmt
Shell)” on page 48 .
Check the
Fault class
and
Description
fields for more information.
If the motherboard is faulty, replace it. See “Remove the Motherboard” on page 230 .
8. Within the Oracle ILOM interface, display the power currently consumed.
-> show /SYS/VPS value
/SYS/VPS
Properties:
value = 159.175 Watts
->
If the power displayed is unreasonable or none at all, replace the motherboard. See “Remove
the Motherboard” on page 230 .
9. If you are unable to determine if the motherboard is faulty, seek further
information.
Servicing the Motherboard 229