manualshive.com logo in svg

Oracle DE2-24, Customer Service Manual

Share
Download
Oracle DE2-24 Customer Service Manual Download Page 65

How to Replace a ZS4-4 DIMM

2.

Extend the controller from the rack as described in 

“How to Extend the Storage

Controller from the Rack” on page 41

.

3.

Remove the top cover as described in 

“How to Remove the Top

Cover” on page 42

.

4.

Remove the memory riser card with the lighted Fault indicators (P0/MR0

and P0/MR1), and locate the failed DIMM. Use the DIMM Fault Remind circuit

to locate the failed DIMM. See 

“How to Identify a Faulted ZS4-4 Memory

Module” on page 63

.

5.

To remove the failed DIMM, rotate both DIMM slot ejector levers outward as far

as they will go.

6.

Carefully lift the DIMM straight up to remove it from the socket.

7.

Repeat the previous steps for any other faulty DIMMs.

8.

Ensure that the DIMM ejector levers at both ends of the DIMM slot are in a fully

open position.

9.

Align the replacement DIMM with the empty slot.

Servicing the Hardware

65

Summary of Contents for DE2-24

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands