manualshive.com logo in svg

Oracle DE2-24, Customer Service Manual

Share
Download
Oracle DE2-24 Customer Service Manual Download Page 17

Getting Started with Servicing the Hardware

TABLE 5

Additional Options for Disks

Action

Description

Locate 

Toggle the locator indicator for the disk. If the LED is

currently turned on, this icon will be blinking.

Offline 

Offline the disk. This option is only available for disks

that are part of a configured storage pool (including

the system pool). Offlining a disk prevents the system

from reading or writing to it. Faulted devices are already

avoided, so this option should only be required if a disk

is exhibiting performance problems that do not result in

pathological failure. It is not possible to offline a disk

that would prevent access to data (i.e. offlining both

halves of a mirror). If the device is an active hot spare,

this will also give the option of detaching the hot spare

completely. Once a hot spare is detached, it cannot be

activated except through another fault or hotplug event.

Note - 

Do not perform a pool configuration operation

while a disk firmware upgrade is occurring. To check

if an upgrade is in progress, navigate to Maintenance >

System in the BUI, or maintenance system updates in the

CLI.

Online 

Online the disk. Reverses the above operation.

SSD Endurance

SSD endurance reports the remaining life expectancy of an SSD. Endurance properties are

reported on the BUI Maintenance > Hardware chassis details page and in the CLI maintenance

chassis disk context. You can set a threshold alert when an SSD exceeds a specified percentage.

For example, set an alert to occur when one or more SSD devices exceeds a 95% threshold.

For more information, see 

“Threshold Alerts” in 

Oracle ZFS Storage Appliance Administration

Guide, Release 2013.1.5.0

.

You can use this feature to monitor the life expectancy of an SSD. For example, if SSD

endurance reports 50% after two years, the SSD is estimated to last for another two years,

assuming the workload is consistent.

Note - 

Do not use reported SSD endurance percentage as an indication to replace the SSD. SSD

warranty replacements are made only when a failure is reported.

InfiniBand Host Controller Adapters

InfiniBand Host Controller Adapters (HCA) report additional properties for the list of available

ports:

Servicing the Hardware

17

Summary of Contents for DE2-24

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands