manualshive.com logo in svg

Oracle DE2-24, Customer Service Manual

Share
Download
Oracle DE2-24 Customer Service Manual Download Page 145

How to Replace a ZS3-2 Memory

16.

Insert the DIMM into the slot, pressing firmly so that both release levers click

closed.

17.

Replace and secure the air duct.

18.

Lower the drive cage to the horizontal position and with the cage slightly

elevated, reconnect the power cable. Tighten the four screws. Reconnect the

cables to the drive backplane and the cable attached to the USB board.

19.

Replace the top cover and tighten the two captive screws.

20.

Push the release tabs on the side of each rail and slowly push the storage

controller into the rack, making sure no cables obstruct the path of the

controller.

21.

Reconnect the data cables and the disk shelf cables.

22.

Connect the power cords to the power supplies. Verify that standby power is on,

indicated by the Power/OK and SP status indicators flashing green on the front

panel.

23.

After the SP status indicator is solid green, use a pen or other pointed object to

press and release the recessed Power button on the front panel. The Power/OK

status indicator next to the Power button lights and remains lit.

Servicing the Hardware

145

Summary of Contents for DE2-24

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands