manualshive.com logo in svg

Oracle DE2-24, Customer Service Manual

Share
Download
Oracle DE2-24 Customer Service Manual Download Page 258

How to Replace a Disk Shelf I/O Module

Note - 

After the DE2-24 disk shelf powers on, which could take several minutes, ensure that the

system power indicator on the front of the disk shelf is lit a steady green, and that each power

supply with fan module status indicator on the rear is list a steady green. If not, power off the

disk shelf and reseat the faulted module. If the module status indicator is not a steady green

after module reinsertion, contact Oracle Customer Service.

12.

Go to the Maintenance > Hardware section of the BUI, and click the right-arrow
icon   at the beginning of the appropriate disk shelf row. As appropriate for the
failure, click either PSU or Fan to verify that the online icon   is green for the

newly installed power supply with fan module.

How to Replace a Disk Shelf I/O Module

Caution - 

Do not remove a component if you do not have an immediate replacement. The disk

shelf must not be operated without all components in place, including filler panels. Refer to

“Disk Shelf Hardware Overview” on page 234

 for component locations.

The following disk shelves have I/O Modules (IOMs):

■

Oracle Storage Drive Enclosure DE2-24P

■

Oracle Storage Drive Enclosure DE2-24C

The I/O Modules (IOMs), which are similar to SIM boards, are hot-swappable so you can

replace them without removing power to the system.

258

Oracle ZFS Storage Appliance Customer Service Manual • February 2016

Summary of Contents for DE2-24

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands