manualshive.com logo in svg

Oracle DE2-24, Customer Service Manual

Share
Download
Oracle DE2-24 Customer Service Manual Download Page 211

How to Replace a 7x20 Memory

8.

Line up the replacement DIMM with the connector, aligning the notch with the

key to ensure that the component is oriented correctly.

9.

Push the DIMM into the connector until the ejector tabs lock the component in

place.

10.

7120 or 7320: Components may differ slightly between the 7120 and 7320,

however service procedures for each are identical. The illustration shows the

7320. To replace the cover:

a.   

Place the top cover on the chassis so that it hangs over the rear of the

storage controller by about an inch (2.5 cm).

b.   

Slide the top cover forward until it seats.

Servicing the Hardware

211

Summary of Contents for DE2-24

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands