FCIO_RESET_LINK
Error Message Occurs After Issuing the
luxadm -e forcelip
Command
Workaround:
When running such scripts, keep in mind that it takes time to discover every device connected
to the Converged Network Adapter. Greater numbers of connected devices require more time
for discovery. If there are many devices connected to the Converged Netword Adapter, perform
such configurations manually at first, and note how much time is required for all devices to
become visible and usable. Add a 10% time cushion to the maximum time encountered (for
safety) and build that into the script after each
cfgadm
command. If you continue to encounter
the error message, add more time to the maximum time encountered variable in the script.
FCIO_RESET_LINK
Error Message Occurs After Issuing the
luxadm -e forcelip
Command
Bug 15632822
Issue:
You might encounter this error message after issuing the l
uxadm -e forcelip
command from a
system with the following configuration:
■
Oracle Solaris 10 10/09 OS running
■
Adapter installed and connected to a Brocade 8000 FCoE switch
■
Brocade 8000 FCoE switch connected to a tape zone on a FC SAN with an SL48-LTO4 FC
tape library
If you issue the l
uxadm -e forcelip
command upon the removal of a device from the tape
zone, this message might be generated:
Error: FCIO_RESET_LINK ioctl failed.
Could not reset the loop
Workaround:
To avoid encountering the error message, manually unconfigure the unusable device (the device
removed from the tape zone) at the attachment point of the device:
To Manually Unconfigure the Unusable Device
1.
Issue the
cfgadm -al
unusable-device-attachment-point
command to list the unusable
device, as described in the following procedure.
Chapter 4 • Known Issues
65
Summary of Contents for 7105381
Page 2: ......