Updating the PXE
Copyright (c) 2009-2010 QLogic Corporation
Port1 MAC=00 18 8B FF EE F9
PXE boot is disabled. Press <Ctrl-T> to enable within 5 sec......
When PXE boot is enabled on an adapter port, the next system reboot shows the following PXE
banner on the modified port:
QLogic PCI 3.O PXE V1.xx
Copyright (c) 2009-2010 QLogic Corporation
Port2 MAC=00 18 8B FF EE FB
PXE boot is enabled. Press <Ctrl-T> to disable within 5 sec......
Note -
PCI 3.0 compliant servers show
QLogic PCI 3.0 PXE v1.xx
.; PCI 2.1 compliant servers
show only
QLogic PXE v1.xx
. By default, PXE boot is disabled on the adapter ports. If the
server does not detect the QLogic PXE banner, disable the unused on-board NICs.
Enable QLogic PXE
The following shows the response when the PXE is enabled after pressing the
Ctrl-T
key
sequence.
QLogic PCI 3.O PXE V1.xx
Copyright (c) 2009-2010 QLogic Corporation
Port1 MAC=00 18 8B FF EE F9
PXE boot is disabled. Press <Ctrl-T> to enable within 5 sec......
<Ctrl-T> was pressed and PXE boot is enabled.
The following shows the response when the PXE is disabled after pressing the
Ctrl-T
key
sequence.
QLogic PCI 3.O PXE V1.xx
Copyright (c) 2009-2010 QLogic Corporation
Port2 MAC=00 18 8B FF EE FB
PXE boot is enabled. Press <Ctrl-T> to disable within 5 sec......
<Ctrl-T> was pressed and PXE boot is disabled.
After the operating system is selected, QLogic PXE bootprom automatically detects the boot
server and starts the OS installation. For example:
Linux Boot Server:
boot: (enter to continue)
36
Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models
SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and
7105382 • March 2017
Summary of Contents for 7105381
Page 2: ......