Updating the FCode
■
“FCode Update Utilities” on page 38
Hardware and Software Configuration for FCode
Hardware configuration includes the following:
■
Oracle's SPARC Solaris boot client
■
Oracle Solaris boot server
■
Converged Network Adapter installed in Oracle's SPARC Solaris boot client
Software configuration requires that you verify (via the
.properties
command) the FCode
version and release date by viewing the values of the following properties:
■
revision-level -
3.15
or later
■
release-date -
2013-04-30
or later
The following example session shows how to perform an Ethernet boot at the Open Firmware
ok
prompt on the Oracle's SPARC boot client console:
{0} ok
show-nets
a) /pci@7c0/pci@0/pci@9/ethernet@0,1
b) /pci@7c0/pci@0/pci@9/ethernet@0
c) /pci@7c0/pci@0/pci@2/network@0,1
d) /pci@7c0/pci@0/pci@2/network@0
e) /pci@780/pci@0/pci@1/network@0,1
f) /pci@780/pci@0/pci@1/network@0
q) NO SELECTION
Enter Selection, q to quit:
b
/pci@7c0/pci@0/pci@9/ethernet@0 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@7c0/pci@0/pci@9/ethernet@0
{0} ok
boot /pci@7c0/pci@0/pci@9/ethernet@0 -v
FCode Update Utilities
You can update the FCode using the SANsurfer FC HBA Manager or SANsurfer FC HBA CLI
utilities. These utilities are located on the Oracle support area of the QLogic web site:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/Oracle_Search.aspx
38
Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models
SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and
7105382 • March 2017
Summary of Contents for 7105381
Page 2: ......