vpd r/w failed
Error Messages Are Displayed
Workaround:
None.
vpd r/w failed
Error Messages Are Displayed
CR 20084365, 19154195
Conditions:
■
Operating System: Any operating system (OS) based on Red Hat Linux 5.9 or greater,
including, but not limited to, Oracle Enterprise Linux 5.9 OS with Unbreakable Enterprise
Kernel (UEK) 3, RHEL 6.6 OS, or OVM 3.3.1
■
Operating Protocol Mode: CNA and HBA
■
Environment: Universal HBA installed in an x86 system, during functional check
procedures
Issue:
If you are using any operating system based on the Red Hat Linux operating system, you might
receive “vpd r/w failed” messages upon issuing functional check commands, such as
dmesg
and
lspci
.
Workaround:
None. Ignore these messages as they do not adversely affect the functionality of the universal
HBA.
Error Message Occurs After Running the
cfgadm -c
configure
ap-id
Script
Bug
15750655
Issue:
When attempting to script rapid unconfiguration/configuration of the Converged Network
Adapter, you might encounter the following error message:
nwamd_ncu_handle_link_action_event: ignoring action for link:qlge1: permission denied
64
Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models
SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and
7105382 • March 2017
Summary of Contents for 7105381
Page 2: ......