To Connect a Copper Cable
To Connect a Copper Cable
Before You Begin
Use only SFP+ direct attach twinax cables approved by Oracle. The following table lists the
part numbers for the approved twinax copper cables.
Brocade Part Number
Oracle Part Number
Cable Description
SN-TWX-0101
SG-XSWBROSFP-1MIPK
Brocade Twinax, 1 Meter, 1 Pack, SN
SN-TWX-0108
SG-XSWBROSFP-1M8PK
Brocade Twinax, 1 Meter, 8 Pack, SN
SN-TWX-0301
SG-XSWBROSFP-3M1PK
Brocade Twinax, 3 Meter, 1 Pack, SN
SN-TWX-0308
SG-XSWBROSFP-3M8PK
Brocade Twinax, 3 Meter, 8 Pack, SN
SN-TWX-0501
SG-XSWBROSFP-5M1PK
Brocade Twinax, 5 Meter, 1 Pack, SN
SN-TWX-0508
SG-XSWBROSFP-5M8PK
Brocade Twinax, 5 Meter, 1 Pack, SN
Note -
If you are connecting this Converged Network Adapter to a Cisco FCoE switch, do not
use the cables listed in this section. Instead, use OM-3 twin-ax cables that are supported by
Cisco. Check with Cisco for the recommended twin-ax cables to use with the specific Cisco
switch that you are using.If any issues occur due to the use of Cisco cables, contact Cisco
support for resolution.
1.
Insert one end of the copper cable into an empty SFP+ cage on the adapter.
Confirm the cable is fully inserted and engaged.
24
Sun Storage 10 GbE FCoE PCIe Converged Network Adapter From QLogic Installation Guide For Adapter Models
SG-PCIEFCOE2-Q-SR, SG-XPCIEFCOE2-Q-SR, SG-PCIEFCOE2-Q-TA, SG-XPCIEFCOE2-Q-TA, 7105381, and
7105382 • March 2017
Summary of Contents for 7105381
Page 2: ......