If this Error messages occurs, follow these instructions:
1. Perform the Cleaning Procedure (refer to manual for instructions)
2. Examine the print on the cleaning paper
3. If there are parts missing in the printed block, this indicates that parts of the printhead
no longer work.
4. In this case, replace the printhead.
Five blinks - Head Dot(s) Failure
This Error often indicates that some of the dots have failed on the printhead test. In some
cases, it is possible to clear this error by turning the printer OFF and ON.
This also may happen when the printhead has been replaced.
Six blinks - Temperature Shut Down
This error indicates that the printhead has gotten too hot. Reduce the print energy and/
or head temperature.
Seven blinks - Margin Error
This Error occurs when data is placed in two specific areas:
1. Within 3/4” (19 mm) from the top
2. Within 1/2” (13 mm) from the right side
Remove information within these areas. Press Reset to clear the Error Send the job again
to Print
Eight blinks - Foil Plate Motion Error
This error indicates that the foil plate mechanism has not returned to the home position.
If any of these error messages occur and information above does not help solve the pro-
blem, follow these instructions:
1. Turn the printer OFF and then ON to clear the job.
2. Send the job again.
3. If this does not solve the problem, report to your dealer or to ImPress Systems if you
purchased directly.
STATUS TAB
t is possible to find this information under Printer Properties, Status Tab. Go to Printer
Properties, Advanced, Status Tab Select “Printer Error” in menu and select “Get Status”.
Illustrations on next page are for Foil Xpress printers. However, instructions also apply for
Foil Xpress Direct.
Foil Xpress Direct
user guide
EN
76
Summary of Contents for Foil Xpress Direct
Page 41: ...41...
