Optoma ZU720T User Manual Download

Page: 72 / 76

English

ADDITIONAL INFORMATION

Abnormal HDMI image

Select “

OSD menu



Display



HDMI 1 EDID/ HDMI 2 EDID/ HDMI 3 EDID” to “1.4” or “2.2”.

Blurry double image

Make sure “

OSD menu



3D Tech.” is not on to avoid normal 2D image appear blurry double

image.

Two images, side-by-side format

Set the “

OSD menu



“3D Format” to “SBS”.

Other problems

The projector stops responding to all controls

If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before

reconnecting power.

Remote control problems

If the remote control does not work

Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the

projector.

Make sure batteries are inserted correctly.

Try to operate the remote control by pointing it to the projected image.

Charge battery if it is exhausted.

Summary of Contents for ZU720T













































































Search results

Summary of Contents for ZU720T

Reviews:

Related manuals for ZU720T

Brands by name

Popular brands

Optoma ZU720T, User Manual

Search results

Summary of Contents for ZU720T

Reviews:

Related manuals for ZU720T

Brands by name

Popular brands