Optoma ZU720T User Manual Download

Page: 53 / 76

English 53

USING THE PROJECTOR

Note:

Exiting OSD will automatically apply the entered values.

IP Address

: Display the IP address.

Subnet Mask

: Display subnet mask number.

Gateway

: Display the default gateway of the network connected to the projector.

DHS

: Display the DNS number.

Reset

: Reset all values for LAN parameters.

System menu

Language

Select your preferred system language between English, French, German, Spanish, Italian, Portuguese, Dutch,

Swedish, Finnish, Greek, Danish, Norwegian, Polish, Russian, Simplified Chinese, Traditional Chinese, Korean,

Arabic, Japanese, Thai, Hungarian, Czechoslovak, Turkish, Farsi, Vietnamese, Indonesian, and Romanian.

Keyboard

Select the keyboard language.

Date and Time

Configure the date and time settings.

Date

: Display the date (read-only).

Time

: Display the time (read-only).

Select Time Zone

: Select the time zone in your location.

Daylight Saving Time

: Set the daylight saving time.

Use 24-hour Format

: Set to “On” to display time in 24-hour format. Set to “Off” to display time in 12-

hour format (AM/PM).

System Update

System will look for updates automatically every time the projector is connected to the Internet (OTA).

Internal Storage

View the internal storage usage.

Apps

Configure the apps. Options include: TapCast Pro, Browser, and LocalMM.

Note:

Adding apps to the projector by user is not supported.

Legal

Review legal documents including “Terms and Conditions of Use”, “Privacy Policy”, and “Cookies Policy”.

Note:

You can review legal documents online as well. Please refer to the following web addresses:

Terms and Conditions of Use

: https://www.optoma.com/terms-conditions/

Privacy Policy

: https://www.optoma.com/cookies-policy/

Cookies Policy

: https://www.optoma.com/software-privacy-policy/

Reset

Reset all settings including data (“Reset all settings”) or reset settings to the factory defaults only (“Reset to

Default”). Select “Cancel” to exit the menu and keep the current configuration.

Note:

After you select “Reset to Default”, the projector will automatically turn off. To start the recovery procedure,

turn on the projector.

Summary of Contents for ZU720T













































































Search results

Summary of Contents for ZU720T

Reviews:

Related manuals for ZU720T

Brands by name

Popular brands

Optoma ZU720T, User Manual

Search results

Summary of Contents for ZU720T

Reviews:

Related manuals for ZU720T

Brands by name

Popular brands