Optoma ZU720T User Manual Download

Page: 38 / 76

English

USING THE PROJECTOR

Brightness

Adjust the brightness of the image.

Note:

When the Display Mode Lock function is turned on, the Brightness will be unavailable.

When the input source switch to Home, the Brightness will be unavailable.

Contrast

The contrast controls the degree of difference between the lightest and darkest parts of the picture.

Note:

When the Display Mode Lock function is turned on, the Contrast will be unavailable.

When the input source switch to Home, the Contrast will be unavailable.

Sharpness

Adjust the sharpness of the image.

Color

Adjust a video image from black and white to fully saturated color.

Note:

When the input source VGA, HDMI 1, HDMI 2 and HDBaseT color formats are RGB, the Color will be

unavailable.

Tint

Adjust the color balance of red and green.

Note:

When the input source VGA, HDMI 1, HDMI 2 and HDBaseT color formats are RGB, the Tint will be

unavailable.

Gamma

Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps

to optimize your image output.

Film

: For home theater.

Video

: For video or TV source.

Graphics

: For PC / Photo source.

Standard(2.2)

: For standardized setting.

1.8/2.0/2.4/2.6

: For specific PC / Photo source.

Note:

These options are only available if the 3D mode function is disabled, the

Wall Color

setting is not set

Blackboard

, and the

Display Mode

setting is not set to

DICOM SIM.

HDR

When

Display Mode

HDR

Blackboard

and

DICOM SIM.

, Gamma will be unavailable.

When the

Display Mode

Lock,

DICOM SIM

mode,

Wall Color

, or

HDR

function is turned on, the

Gamma will be unavailable.

Color Settings

Configure the color settings.

BrilliantColor™

: This adjustable item utilizes a new color-processing algorithm and enhancements to

enable higher brightness while providing true, more vibrant colors in picture.

Note:

When the Display Mode Lock, Blending mode, or 3D function is turned on, the BrilliantColor will

be unavailable.

Summary of Contents for ZU720T













































































Search results

Summary of Contents for ZU720T

Reviews:

Related manuals for ZU720T

Brands by name

Popular brands

Optoma ZU720T, User Manual

Search results

Summary of Contents for ZU720T

Reviews:

Related manuals for ZU720T

Brands by name

Popular brands