Optoma ZU720T, User Manual

Page: 44 / 76

English 44
USING THE PROJECTOR
Note:
‡ When the PIP or PBP function is turned on, the 3D Mode will be unavailable.
‡
When the input source switch to Home, the 3D Mode will be unavailable.
3D Tech.
Set the 3D tech. parameter to “DLP-Link” or “3D-Sync”.
3D Format
Use this option to select the appropriate 3D format content.
‡ Auto : When a 3D identification signal is detected, the 3D format is selected automatically.
‡
SBS
: Display 3D signal in “Side-by-Side” format.
‡ Top and Bottom : Display 3D signal in “Top and Bottom” format.
‡ Frame Sequential : Display 3D signal in “Frame Sequential” format. Frame Sequential encoding
method is commonly used on PC content.
‡ Frame Packing : Display 3D signal in “Frame Packing” format. Frame Packing encoding method is
primarily used with 1080p Blu-ray.
Note:
‡ When the PIP or PBP function is turned on, the 3D Format will be unavailable.
‡
When the 3D Mode function is turned off, the 3D Format will be unavailable.
‡
When the input source switch to Home, the 3D Format will be unavailable.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
3D Sync Out
Transmit a 3D sync signal by the 3D sync output corrector to the emitter or to the next projector for 3D blending
purposes.
L/R Reference
Source of the left or right reference.
‡ Field GPIO : Select Field GPIO to make the first 3D output signal the same for multiprojectors
application.
‡ 1ST Frame : This is used for single 3D projector.
3D Frame Delay
Correct asynchronous displaying of images under 3D blending.
Reset
Return the factory default settings for 3D settings.
Note:
‡
When the PIP or PBP function is turned on, the Reset will be unavailable.
‡ When the 3D mode function is turned off, the Reset will be unavailable.
‡
When the input source switch to Home, the Reset will be unavailable.
Audio Menu
Mute
Use this option to temporarily turn off the sound.
‡ On: Choose “On” to turn mute on.
‡ Off: Choose “Off” to turn mute off.