English
54
USING THE PROJECTOR
Power menu
Direct Power On
Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the “Power” button on the projector keypad or on the remote control.
Signal Power On
Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the “Power” key on the projector Keypad or on the remote control.
Auto Power Off (min.)
Set the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Sleep Timer (min.)
Set the countdown timer interval. The countdown timer will start, with or without a signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Power Mode (Standby)
Configure power mode settings in standby.
Active
: Choose “Active” to return to normal standby.
Eco
: Choose “Eco.” to save power dissipation further < 0.5W.
Communication
: The projector can be controlled via the LAN terminal during power standby.
Note:
The differences between these three power mode settings are as follows:
Standby Mode
Active
Eco
Communication
RS232 Power Status
O
O
O
RS232 Info/Lamp/Hours
O
O
O
Power ON (Command)
Keypad ON
IR ON
RS232 ON
LAN (Browser)
HDBaseT (RS232 ON)
O
O
O
O
X
O
O
O
X
X
O
O
O
O
O
Signal Power ON (Video Signal)
HDBaseT
HDMI 1/2
VGA
Other
X
O
O
X
X
O
O
X
X
O
O
X
LAN/Ethernet ON
O
X
O
HDMI Out (Loop through)
X
X
X
HDMI AMP (Loop through W/O projector is ON)
X
X
X
Audio Out (Loop through)
X
X
X
Projector can provide EDID information to
external derive
X
X
X
Direct Power ON
O
O
O
Summary of Contents for ZU720T
Page 1: ...DLP Projector User manual ...
Page 76: ...www optoma com ...
