Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
15.6.11
Page 6
Safety Digital position display DPA 2000/ DPA 2000S ; Version 2.1.2
©
201
1
GB
1.7
Additional qualification requirements
Work on electric components or equipment must only be carried out by qualified electricians.
1.8
Obligations of the operator
The operator must instruct the staff on all safety standards that apply to the device and to the
operation.
1.9
Obligations of the user
The user has to
read and understood the operating manual,
be familiar with all safety devices and regulations,
be capable of operating the device.
1.10
Safety during operation
Check the digital position display at least once per shift. Inform the person responsible immedia-
tely of any damage, defect or change in operating function.
WARNING!
Before activating the device, double-check that this will, even in combination with the
machine tool, not
•
lead to any danger with respect to people,
•
cause any damage to equipment.
Avoid any unsafe working practices:
Do not work on the device or the machine if your concentration is reduced, for example,
because you are taking medication.
Observe the rules for preventing accidents issued by your association for the prevention of
occupational accidents and safety at the workplace or other inspection authorities.
1.11
Safety during maintenance
Inform operators timely on maintenance and repair work.
Report all safety-relevant changes or performance details of the device. Document all changes,
have the operating manual changed accordingly and train the machine operators.
1.11.1
Disconnecting and making it safe
Switch off the device before starting any maintenance or repair work.
Pull the mains plug.
Place a warning sign on the machine tool.
1.12
Accident report
Inform your superiors and Optimum Maschinen Germany GmbH immediately in the event of
accidents, possible sources of danger and any actions which almost led to an accident (near
misses) that are connected with the digital position display and the machine tool.
