Description of the basic operation
OPTIMUM
M A S C H I N E N - G E R M A N Y
15 / 06 / 2011
Page 34
Description of the basic operation Digital position display DPA 2000/ DPA 2000S ; Version 2.1.2
©
201
1
GB
-
Press the
key to prepare the entry of the following parameter.
The display screen on the upper right will show
indicating that you may now
enter the position of the ending point.
The two axes related to the selected coordinate layer will display the last entered coordinates of
the ending point position. The other axis that has no concern with the selected coordinate layer
will not display anything.
Enter the position of the end point:
-
Select coordinate axis and the indicator light of this axis is illuminated;
-
Enter new coordinate value;
-
Press the
key to confirm;
-
Repeat the above three steps to finish the input of the two coordinates for the end point;
-
Press the
key to prepare the entry of the following parameter.
The display screen on the upper right will show
indicating that you may now
enter the maximum cutting volume.
The LEDs on the X-axis will display the last entered cutting volume and the last entered value
will be displayed on the LEDs on the Y-axis.
Enter the maximum cutting volume and then press the
key to confirm.
After completing the entry of parameters, it will go back to the function automatic machining. The
display screen on the upper right will show
indicating
that the sequence
number of the point being machined currently is No. 1.
The two axes related to the selected coordinate layer will display the coordinate values relative
to the position of the point being machined currently. The other axis will display normally.
II.After entering the function arc machining, the display screen on the upper right will show
.
Move the machining tool so that the LEDs on the two axes of the selected coordinate layer dis-
play .
After completing the machining on this point of the arc, press the
key to select the follo-
wing machining point.
The display screen on the upper right will show
. Then move the machine tool
again so that the LEDs on the two axes of the selected coordinate layer display
.
Then complete the machining on this point of the arc. Repeat the above procedures until
completing the machining of the whole arc.
Press the
key to select the next point and the sequence number will ascend. When the
sequence number of the point equals to the calculated maximum point number (the last point on
the arc), press the
key to select point 1 again.
Press the
key to return to the position of the preceding point, and the sequence number
of the point will descend.
