Assembly and commissioning
OPTIMUM
M A S C H I N E N - G E R M A N Y
15 / 06 / 2011
Page 16
Assembly and commissioning Digital position display DPA 2000/ DPA 2000S ; Version 2.1.2
©
201
1
GB
3
Assembly and commissioning
The digital position display DPA 2000S is preassembled.
INFORMATION
If you want to use the digital position display you need at least one measuring gauge. Measuring
gauges are not part of the delivery volume of the digital position display.
The position display DPA 2000S offers you the option to connect absolutely measuring as well
as incrementally measuring position sensors.
Only use original OPTIMUM path-measuring systems, since the position display is only adju-
sted to such path-measuring system and this way will guarantee a safe functioning.
3.1
Delivery volume
Upon delivery immediately check if the device had been damaged during transport. Compare
the delivery volume with the data on the delivery note.
3.2
Storage
CAUTION!
In case of improper storage it is possible that important components are being damaged
and destroyed.
Store the packed or already unpacked device only at dry environmental conditions at a
temperature from 0 °C to 40 °C.
If you need to store the device or any accessory parts for more than three months and under
other environmental conditions than those prescribed by this manual, contact the company
Optimum Maschinen Germany GmbH.
3.3
Adding the device
3.3.1
Requirements for the installation site
CAUTION!
When choosing the installation site, please take into account the length of the connection
lines for the measuring gauges.
The installation site needs to be dry and vibration-free and comply with the ergonomic requi-
rements of a working place. Observe the safety instructions for working nearby machine tools.
The working area for the operation, maintenance and repair works must not be hindered by
adding the position display.
3.3.2
Installing the device
The device needs to be positioned freely at an appropriate place or be mounted to a horizontal
subsurface or to a wall using the attached fixing material.
3.3.3
Assembling the measuring gauges
Measuring gauges are linear measuring systems which collect the position of mobile machine
parts via a sensor and forward them coded to the position display.
