Optex PT-7LD, Instruction Manual

Page: 5 / 56

Accessories : Quick Reference Card, Instruction Manual (This book)
Option : Black body tape
Specifications
5
Model
Measurement range
Display range
Field of view
φ25 / 300 mm (D:S = 15:1)
Mirror / silicon filter Optics
Thermopile Sensing element
8 to 14μｍ Spectral response
0.7 Sec. / 90% Response time
Accuracy（ε ≒ 0.95）
－30.0 to 0℃：±3.0℃、0.1 to 100.0℃：±1.0℃、100.1 to 200.0℃：±2.0℃
±1℃ of reading value Repeatability
0.1℃ Display resolution
Non-coaxial laser marker (CLASS 2) Sighting method
15 seconds HOLD time
ON/OFF Switchable Continuous measurement mode
99-point memory Memory
High/Low Limit Temp. for Alarm LED/Buzzer
Emissivity（ ）Adjustment ε HOT（0.95）/ COLD（0.85）Switchable
9V alkaline battey, 6LR61/6LF22 (1 piece) Power supply
Battery life
0 to 50℃ Ambient temperature
35% to 85％Rh（Without due condensation） Ambient humidity
－10 to 60℃ Storage temperature
IP67 Protective structure
ABS (Antibacterial) Material
HｘWｘD＝160ｘ44ｘ42mm Dimension
200g (Incl. Battery)
EMC Directive(2014/30/EU),RoHS Directive(2011/65/EU),China RoHS(MIIT Order No.32)
FDA (21 CFR 1040.10 and 1040.11)
(expect for deviations pursuant to Laser Notice No.50)
Consumer product safety Act.(PSC Mark)
EN 61326-1:2013, IEC 60825-1:2007,2014
Weight
Applicable regulations
Applicable standards
12 Hours (With max load)
－30.0 to 200.0℃
－40.0 to 220.0℃
PTー7LD
ON/Off Switchable
※2
※1
※1 The measurement accuracy in the specification is limited to the calibration conditions of our factory.
※2 This product is classified as Class 2 by IEC 60825-1: 2007 according to Laser Notice No.50, FDA Guidance Document.
For China RoHS, please refer to http://www.optex-fa.com/rohs_cn/