Optex PT-7LD Instruction Manual Download Page 18

Page: 18 / 56

Introduction

• Please make sure the model you purchased is the one you specified.

• Please read the manual thoroughly before using the THERMO-HUNTER

PT-5LD for correct usage.

• After reading this manual, please retain it for future reference.

• OPTEX is not liable for any incidental or consequential damages or

losses including losses of data or chances of measurement, arising

from accident, misuse or abnormal conditions of operation or handling.

Contents

Introduction ····················································································

Safe Usage ····················································································

Warnings & Cautions on Environment and Usage ·······························

Specifications ·················································································

Name of Components ·······································································

Operation ·······················································································

Normal Measurement / Continuous Measurement ·······························

Field of View ···············································································

Memory Function ········································································

Settings ·························································································

Setting "High Limit Temperature for Alarm"·········································

Setting "Low Limit Temperature for Alarm" ·········································

Setting "Emissivity Ratio (DARK/BRIGHT mode)" ································

Setting "

C /

F mode" ···································································

"Record Erasing" ·········································································

Setting "Hold mode Selections" ······················································

Troubleshooting

Conformance to EU Directives

・

This is a class A product. In residential areas it may cause radio interference,

in which case the user may be required to take adequate measures to reduce

interference.

···············································································

Maintenance / Battery ·······································································

Thank you very much for purchasing this product. This device is a non-contact

thermometer to convert the infrared energy emitted from the surface of an object into

temperature. This thermometer measures the surface temperature of solid and liquid

without contacting them. The temperature of gas cannot be measured by this thermometer.

Summary of Contents for PT-7LD

























































Search results

Summary of Contents for PT-7LD

Reviews:

Related manuals for PT-7LD

Brands by name

Popular brands

Optex PT-7LD, Instruction Manual

Search results

Summary of Contents for PT-7LD

Reviews:

Related manuals for PT-7LD

Brands by name

Popular brands