Optex PT-7LD, Instruction Manual

Page: 39 / 56

5
Specifications
Accessories : AA battery x 2pcs. (for checking operations), Instruction manual (this document)
exclusive protective case, USB cable (Only for PT-U80)
Optional : Blackbody tape
PT-U80 PT-S80 Model
Measuring range - 30 to 600°C
□ 30/1000mm (D:S=33:1) Field of view
Si lens Optics
Sensing element Thermopile
8 to 14 μm Wavelength
0.5sec. / 90% Response time
Accuracy ( ε 0.95)
- 30.0 to 0°C : ± 3°C, 0.1 to 200°C : ± 2°C,
200 to 600°C : ±1% of reading value
±1°C of reading value Repeatability
Display resolution
- 30.0 to 199.9°C : 0.1°C, 200 to 600°C : 1°C
Coaxial laser marker (Class 2) Sighting method
15 seconds HOLD time
Continuous measurement mode
ON / OFF Selectable –
–
1-point memory 35-point memory
USB output
Memory
High/Low Alarm LED/Buzzer Alarm LED/Buzzer ON/OFF Selectable
Emissivity ( ε ) Adjustment 0.95/0.85/0.70 Selectable
ε
Adjustable
(0.30 to 1.20/0.01step)
Temperature unit °C / °F (Selectable)
NOR / MAX / MIN Display function
AA Battery x2pcs. Power supply
15 Hours (with max load) Battery life
Ambient temperature 0 to 50°C
Ambient humidity 35% to 85%Rh (Without due condensation)
Storage temperature/humidity -10 to 60°C/35% to 85% Rh
ABS/TEEE Material
H x W x D = 182 x 56 x 38 mm Dimension
Approx. 250g (Including batteries)
EMC Directive (2014/30/EU),RoHS Directive (2011/65/EU),China RoHS (M
II
T Order No.32)
FDA (21 CFR 1040.10 and 1040.11) (expect for deviations pursuant to Laser Notice No.50)
Consumer product safety Act.(PSC Mark)
EN 61326-1:2013, IEC 60825-1:2007,2014
Weight
Applicable regulations
Applicable standards
※ 1 The measurement accuracy in the specification is limited to the calibration conditions of our factory.
※1
For China RoHS, please refer to http://www.optex-fa.com/rohs_cn/