ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
PORTUGUÊS
EN-5
14
Determine the detection length. (2 m or 5 m)
Side view
0
5
10
15
2.6
0 (ft.)
3.3
3.9
0.8
0
(m)
1.0
1.2
(ft.)
1
0
2
3
4
5
(m)
0
5
10
15
0.8
0
(m)
1.0
1.2
2.6
0 (ft.)
3.3
3.9
1
0
2
3
4
5
(m)
(ft.)
Side view
5 m detection length (Factory default)
2 m detection length
If 2 m is required, rotate the lower
lens 180 degrees.
15
Attach the main unit cover.
16
17
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
Perform walk test.
After walk test is complete, set DIP switch 1 (WALK TEST MODE) from “ON” to “OFF”.
Note>>
• To prepare for walk test, check that DIP switch
1 (WALK TEST MODE) is set to “ON (TEST)”
before attaching main unit cover.
Note>>
• The battery life will be shortened unless the
DIP switch 1 is set to “OFF”.
• To use the LED in normal operating
condition, set the DIP switch 4 to “ON”.
13
Determine the horizontal detection angle
and attach the fixture.
1.
3.
2.
• When the unit is mounted on the
wall to look transversely,
choose the guide-mark
engraved.
• When the unit is mounted on the
corner to look ahead along the wall,
choose the guide-mark
located on the opposite
side of the wall.
Note>>
• Check that the fixture and
bracket engage correctly.
Note>>
Align the detection area
parallel to the wall to
reduce interference with
the wall.
Note>>
• To make adjustments, remove the fixture.
Note>>
• Do not remove the upper lens.
DIP switch
ON
1 2 3 4 5 6
