ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
PORTUGUÊS
EN-8
-ANTI-MASKING function
ANTI-MASKING test mode
Normal mode
The trouble is output after
3 minutes.
10 minutes
1 minute
ON
(Factory default)
ANTI-MASKING OFF
ANTI-MASKING ON
Function
Position
OFF
ON
OFF
Teaching
When masking condition continues more than 3 minutes, TROUBLE will be generated.
TROUBLE is generated after 20 seconds under the anti-masking test mode.
Teaching mode starts when both the separate box cover and the main unit cover are attached.
Please be careful not to leave any object within 1 m from the unit.
The trouble is output after
20 seconds.
ON
LED OFF
LED ON
Function
Position
OFF
(Factory default)
LOW
Low sensitivity
Normal sensitivity
Function
Position
STD
(Factory default)
ON
OFF
STD
LOW
Note>>
• If the LED lights, check the DIP switch 1
(WALK TEST MODE) setting.
N.O.
N.C.
N.O.
N.C. output
N.O. output
Function
Position
N.C.
(Factory default)
4-3
ALARM & TROUBLE OUTPUT
DIP switch 3
FTN-R
FTN-RAM
4-4
LED
DIP switch 4
FTN-R
FTN-RAM
4-5
PIR SENSITIVITY
DIP switch 5
FTN-R
FTN-RAM
4-6
ANTI-MASKING
DIP switch 6
FTN-R
FTN-RAM
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
