ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
PORTUGUÊS
EN-6
10
Connect the connectors.
Notes>>
11
Transmitter
1.
2.
3.
Separate box side
Main unit side
Red
Black
White
Yellow
Green
Blue
Brown
Orange
Grey
Red: Power input (+)
Black: Power input (-)
White: Alarm
Yellow: Alarm
Green: Trouble
Blue: Trouble
Brown: Tamper
Orange: Tamper
Grey: Tamper
Install the transmitter and
attach the separate box cover.
12
For the subsequent procedure, refer to
steps 13 to 17 (page 5).
2-5
SIDE-BY-SIDE AND TOP-TO-BOTTOM METHOD
6
Open the knockout.
Main unit
(Back surface)
Separate box
(Back surface)
Separate box
For the stacking method, refer to 2-4.
7
Pull the wire connectors through wiring
knockout.
Wall mounting
knockout
Wall mounting
knockout
Wiring knockout
Wiring knockout
(For side-by-side method)
8
Mount the bracket and the separate box to the wall.
Screw (3 × 20 mm)
Screw (3 × 20 mm)
Hold the top part of the bracket
and mount the main unit.
1.
3.
2.
Mounting
height:
0.8 to 1.2 m
(2.6 to 3.9 ft.)
100 mm
(3.94 inches)
83.5 mm
(3.29 inches)
Wiring knockout
(For top-to-bottom method)
• The tamper output is not exclusive. The anti-masking and
tamper circuits share the trouble output.
• For the wall tamper wiring connection (option), refer to
5-1.
• If the tamper connection is made between the main unit
and the separate box, cut the jumper wire (orange) as
illustrated. Otherwise, neither the separate box tamper
nor the option wall tamper switch will be activated.
Conversely, if the tamper connection is not made
between them even the jumper cutting situation, the
trouble signal will remain activate.
Double-sided
tape
Double-
sided
tape
Side-by-side
method
Top-to-bottom
method
Sponge
Sponge
9
Note>>
• Be careful not to pinch wires.
Wiring
