ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
PORTUGUÊS
EN-7
3
2
1
Detected
Not detected
Note>>
Check that LED lights for 2 seconds
when the intended object is detected.
Set the DIP switch 1 (WALK TEST MODE) to “OFF (NORM)”.
Set the DIP switch 1 (WALK TEST MODE) to
“ON (TEST)”.
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
●: Factory default
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
TEST
NORM
5S
120S
5S
120 sec.
5 sec.
Function
Position
120S
(Factory default)
TEST
(Factory default)
• The LED lights irrespective of the DIP switch 4
(LED) setting.
• The DIP switch 2 (BATTERY SAVING TIMER)
setting is inactive.
• The LED lights depending on the DIP switch 4
(LED) setting.
• The DIP switch 2 (BATTERY SAVING TIMER)
setting is active.
Function
Position
NORM
• The switch is set to “ON (TEST)” by factory default.
Note>>
• The detector will not generate alarms at
intervals shorter than the specified time.
Note>>
• The battery life will be shortened unless the DIP switch 1 is set to “OFF”.
• To use the LED in normal operating condition, set the DIP switch 4 to “ON”.
DIP switch
1 WALK TEST MODE
2 BATTERY SAVING TIMER
3 ALARM & TROUBLE OUTPUT
4 LED
5 PIR SENSITIVITY
6 ANTI-MASKING
Do not touch the
PCB except for the
DIP switch.
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
DIP switch
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
DIP switch
3
WALK TEST
4
DIP SWITCH SETTING
3-1
WALK TEST
4-1
WALK TEST MODE
DIP switch 1
FTN-R
FTN-RAM
4-2
BATTERY SAVING TIMER
DIP switch 2
FTN-R
FTN-RAM
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
